Skip to main content
Model Mender

Browser-local converter

JPG to SVG converter

Trace a JPG or JPEG image into closed vector SVG paths on your own machine. Adjust the brightness threshold, smoothing tolerance and minimum speck area while viewing the live linework, then export a verified SVG sized in millimetres.

Drop your JPG files here

STL, OBJ, PLY, GLB, glTF, 3MF, SVG and DXF, plus PNG and JPG traced to outlines. Nothing is uploaded: files are read and converted inside this tab.

Checking what this device can handle...

Queue

No files yet. Drop files above, or use the file picker.

Add a drawing to see it here.

Output

Units

Size and placement

Repair and cleanup

These can change the shape, so they need a before-and-after review before export.

Inspection

Add a model to see its dimensions, mesh health and estimated volume.

What this JPG to SVG conversion does and does not do

  • Monochrome threshold tracing only: pixels darker than your threshold (or lighter, when inverted) become one closed vector shape. Colour separation and photograph vectorisation are not performed.
  • JPEG compression creates faint 8x8 blocks and ringing around high-contrast edges. Those artefacts can cross the threshold as jagged edges or specks, so use the smoothing and speck-size controls, or start from a PNG if you have one.
  • JPEG has no transparency channel, so the entire image rectangle is evaluated. Artwork needs a clean, contrasting background.
  • Outlines are simplified straight segments within your pixel smoothing tolerance rather than fitted Bezier splines.
  • Closed outlines are combined into one even-odd SVG path at the physical width in millimetres you choose, then re-opened and checked before download.

Troubleshooting

JPEG noise around edges turns into jagged paths or dots

Raise the smoothing tolerance slightly and increase "Ignore specks under" to filter out small compression islands. Moving the threshold away from the mid-grey halo also sharpens the boundary.

Everything came out inverted or as a solid block

The background fell on the shape side of the threshold. Lower the threshold for darker ink, or enable invert if your artwork is light on a dark background.

The output size does not match what I need for cutting

Set the target width in millimetres in the tracing controls. Height follows the image aspect ratio and both are written explicitly into the SVG.

Questions

Should I use PNG or JPG when tracing to SVG?

PNG whenever you have it: PNG is lossless and supports transparency, so edges stay crisp and backgrounds disappear cleanly. JPG still works well for bold, high-contrast logos and scans once smoothing and speck filtering are tuned.

Will the SVG work in Cricut, Silhouette, LightBurn and Illustrator?

Yes. The file contains a standard SVG path with explicit millimetre dimensions and an even-odd fill rule so interior holes stay open, and every export is re-parsed and checked before download.

Is my JPG sent to a server?

No. The browser decodes the JPEG locally and traces it in a Web Worker. Nothing leaves your device.

Related tools